Thingiverse
Electric_toothbrush_base_multi
par nanoBorg88
4
Téléchargements
5
Likes
0
Makes
My brother has 4 electric toothbrushes and wanted something to help hold the bases neatly when he charged all of them.
I designed this peice with flat edges and locating holes so the can be glued together. I used a wooden skewer of diameter 3mm and super glue.
To flatten the edges a little more I got a sanding stone and sliding the flat edge back and forth on a flat surface with the sanding stone as the 'wall' (perpendicular to the surface) helped a bit.
The holes may need to be redrilled with a 3mm drill.
I cut the small inserts to the right length before inserting and gluing.
The print is a tight fit for the base and some force may be required to push it in. After that it should keep gripped quite nicely.
There is a keyhole shape for sliping onto a screw, sticking partly out of the wall.
if using multiple, the hole centers should be 50mm apart.
I designed this peice with flat edges and locating holes so the can be glued together. I used a wooden skewer of diameter 3mm and super glue.
To flatten the edges a little more I got a sanding stone and sliding the flat edge back and forth on a flat surface with the sanding stone as the 'wall' (perpendicular to the surface) helped a bit.
The holes may need to be redrilled with a 3mm drill.
I cut the small inserts to the right length before inserting and gluing.
The print is a tight fit for the base and some force may be required to push it in. After that it should keep gripped quite nicely.
There is a keyhole shape for sliping onto a screw, sticking partly out of the wall.
if using multiple, the hole centers should be 50mm apart.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
