Electronics Shelf - PS280, DP2031, ST-862D

This is part 1 of a set of shelves for an electronics lab bench. If your equipment does not fit this particular setup, it may give you some ideas. It uses acrylic sheets for the horizontal elements. I printed the structural elements in ABS. Print it first and measure it later so that you can account for the shrinkage, which is pretty substantial. In this configuration is supports the following gear: - Tektronix PS280 - Rigol DP2031 - Atten ST-862D Extra parts: 1 x drawer slide: 14" full extension, self-close https://www.amazon.com/dp/B0CP52YXMD 1 x drawer handle: https://www.amazon.com/dp/B0BVFLHMTM 2 x shelves: transparent acrylic sheet 1/2" (measure after assembly to account for shrinkage) 1 x top: black acrylic sheet 1/8" (measure after assembly to account for shrinkage) 1 x drawer bottom: black acrylic sheet 1/8" (measure after assembly to account for shrinkage) 24 x black button head socket screws for shelves: M3-0.5x25mm https://www.amazon.com/dp/B0CG1HP3GX 24 x BT3-12 screws for