Thingiverse
Elegoo Mars Heater
door jindo12345
102
Downloads
51
Likes
0
Makes
Note: Does not fit Mars Pro, only the standard Elegoo Mars
Print Settings:
Printer: Elegoo Mars
Rafts+Supports: Yes, Medium Density
Resolution: 0.04mm
Infill: Solid
Resin: Elegoo White ABS-Like Resin
COTS Components:
Heater:
NOTE: DISABLE HALF OF THE HEATER BY CUTTING ONE OF THE TWO CONNECTED WIRES (Do not cut the common wire)
https://www.amazon.com/Constant-Temperature-Electric-Heating-Incubator/dp/B07BJWJQLK/
Heater Power Supply:
https://www.amazon.com/gp/product/B07PWZQ33N/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thermostat:
https://www.amazon.com/gp/product/B01J7VHS4I/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
FFC:
NOTE: Use two ribbon cables if voltage drop is too high.
https://www.amazon.com/gp/product/B00W8WAICI/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
FFC Breakout:
https://www.amazon.com/gp/product/B07VHL9KDL/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
Print Settings:
Printer: Elegoo Mars
Rafts+Supports: Yes, Medium Density
Resolution: 0.04mm
Infill: Solid
Resin: Elegoo White ABS-Like Resin
COTS Components:
Heater:
NOTE: DISABLE HALF OF THE HEATER BY CUTTING ONE OF THE TWO CONNECTED WIRES (Do not cut the common wire)
https://www.amazon.com/Constant-Temperature-Electric-Heating-Incubator/dp/B07BJWJQLK/
Heater Power Supply:
https://www.amazon.com/gp/product/B07PWZQ33N/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thermostat:
https://www.amazon.com/gp/product/B01J7VHS4I/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
FFC:
NOTE: Use two ribbon cables if voltage drop is too high.
https://www.amazon.com/gp/product/B00W8WAICI/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
FFC Breakout:
https://www.amazon.com/gp/product/B07VHL9KDL/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
