Elegoo Mars vat stand

This is a stand for the Elegoo Mars printer vat. It prints flat on the build plate without supports.
There is a chamfer on the build plate side to eliminate the elephant foot. Before slicing, zoom in to make sure the chamfer is on the plate. It can be done in 4 prints. 2 left pieces in one print approximately 1 hour depending on your settings. 2 right pieces in print #2. 2 stretchers in 3rd print and 2 stretchers in the #4. Stretchers take approximately 20 minutes each print. If your printer is reasonably calibrated the parts will fit together with no filing or sanding. I'm using a mix of Siraya fast, blue, and tenacious. I used superglue and wiped the excess with acetone before using an accelerator.