Element Enduro 24 Chassis

This is a chassis replacement for the Element Enduro24, an rc crawler that desperately needs aftermarket support. This chassis is to allow for angled shock placement while also supporting all the other stock equipment. I designed this with aftermarket shocks that have the brass insert and 2 O-ring set up so that it is spaced off the chassis itself. As a note if you try running a shock upside down it will likely rub, i advise against it.


If you want to run the shocks i do they are found here (https://www.amazon.com/dp/B0C8T464CR?ref=ppx_yo2ov_dt_b_product_details&th=1)


what's most important is finding a shock that includes the Brass swivels, o-rings, and screws to replace the originals. Once you have that you can really run any shock for 1/24 scale.

This set up will allow for more flex in addition to more mounting options for the shocks

As for print settings, do what works with the material you have, installing the parts from the Enduro24 will add the needed rigidity