Thingiverse
Elephant - Decoration
by Elsa7
7
Downloads
7
Likes
0
Makes
The picture shows the Elephant-single-1.stl. If somebody want to print exactly the same.
I made the ears & co a little wider at the Elephant-single-2.stl, so they should be printed at 100%. (It should look the same as the multi-print (https://www.thingiverse.com/thing:3594461)).
This one is printed:
x70%, y70%, z100% (133mm x 104.70mm x 5mm)
20% infill
Layer change: 2.15 first (14); 3.20 second (21); 4.10 third change (27).
(The last picture shows the single print (70%) and the multi color print (100%) together.)
I made the ears & co a little wider at the Elephant-single-2.stl, so they should be printed at 100%. (It should look the same as the multi-print (https://www.thingiverse.com/thing:3594461)).
This one is printed:
x70%, y70%, z100% (133mm x 104.70mm x 5mm)
20% infill
Layer change: 2.15 first (14); 3.20 second (21); 4.10 third change (27).
(The last picture shows the single print (70%) and the multi color print (100%) together.)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
