Elephants Foot Tolerance Test

After noticing an ongoing issue with elephants foot being a regular occurrence on any print I made I found there werent many tests to help tune it out. Most tests I found that would work for this took far too long - I wanted something that would print in 15 minutes.

This test is to help find the ideal setting for the initial layer expansion in Cura.

The blocks are each separated by 0.1, 0.2, 0.3, 0.4, 0.5, and 0.6mm. When you release it from the bed the blocks should be free from each other. My goal was to have gaps smaller than the nozzle be consistent out in final prints.

In a perfect world the 0.1MM gap should come through, but this will at least get me close.