'Embroidered' Dragon - HueForge Print

The Lunar New Year is almost upon us, and with it being the year of the dragon, I felt this was appropriate! It's entirely 3D printed, but the end result looks like it's an embroidered patch! If you need to resize this model, please only resize the X and Y dimensions and NOT the Z dimension! The print model included (both the 3MF and the STL) are printed at 0.08mm layer height, however I also printed this at 0.04mm and the difference in quality was negligible. the 0.04mm version took approx. 10 hours, so I have decided to provide the profile for the 0.08mm layer height which will only take about 5 hours or so on a Bambu Printer. If you need to resize this model, please only resize the X and Y dimensions and NOT the Z dimension! The 3MF has the layer swaps already coded in for Bambu Studio/Bambu printers, and uses 5 colours. You can get away with 4 and drop the orange layer, I reckon! If you're not using a Bambu printer, download the STL and use the following instructions: Printing Inst