'Embroidered' Fox - HueForge Print

This is a print that looks like it's an embroidered piece. Seeing the print physically in real life is mind bending, knowing that it's completely 3D printed and not a single strand of yarn was used for this. The 3MF file will have all instructions for Bambu Studio/Bambu printers included. If you do not want to use the 3MF please use the included STL file and the following instructions: Print InstructionsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA CC3D Orange Transmission Distance: 7.4PLA CC3D Lemon Yellow Transmission Distance: 8PLA Sunlu Beige Transmission Distance: 8.2PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with CharcoalAt layer #8 (0.76mm) swap to OrangeAt layer #13 (1.16mm) swap to Lemon YellowAt layer #16 (1.40mm) swap to BeigeAt layer #17 (1.48mm) swap to Jade White for the rest.___________________________________If you'd like to suppor