Enclosure for LCD2004 with ESP32

This model is very much based on another model but scaled up to fit a bigger LCD2004 screen. Here you can find 2 versions, one is for ESP32 SuperMini (without pins, since usually you get those without pre soldered pins) and other one is for full ESP32 but you need to mount it upside down (since those usually comes with pre soldered pins so this way it's easier to mount). The only difference between those 2 versions is the hole for USB-C for SuperMini version is slightly lower than on the full ESP32 version. Both ESP32 are intended to be mounted with double sided tape, preferably 1mm thick.You'll need 4 M2.5x5.0 screws to mount screen to the panel.