Thingiverse
Enclosure for the DPS3005
di Mawkes
7
Download
10
Likes
0
Makes
These are the plans for a small enclosure for the DPS3005.
Made for 3 mm thick material (plastic or wood can be used).
It uses passive cooling; It has venting holes through the bottom plate and the top.
It is powered through a "DC Power Supply Jack Socket Female Panel Mount Connector 5.5mm 2.1mm" which is mounted on the back plate. It uses another one of these connectors on the front panel.
There's also a dual banana connector ("Couple Terminals Red Black Connector Amplifier Terminal Binding Post Banana") on the front panel for easy access. The outputs are serially connected.
And finally there is an on-off switch ("10*15mm SPST 2PIN ON/OFF G130 Boat Rocker Switch") as can be seen on the picture.
The box has a small tilt for QoL.
All the items needed are available via Aliexpress.
Made for 3 mm thick material (plastic or wood can be used).
It uses passive cooling; It has venting holes through the bottom plate and the top.
It is powered through a "DC Power Supply Jack Socket Female Panel Mount Connector 5.5mm 2.1mm" which is mounted on the back plate. It uses another one of these connectors on the front panel.
There's also a dual banana connector ("Couple Terminals Red Black Connector Amplifier Terminal Binding Post Banana") on the front panel for easy access. The outputs are serially connected.
And finally there is an on-off switch ("10*15mm SPST 2PIN ON/OFF G130 Boat Rocker Switch") as can be seen on the picture.
The box has a small tilt for QoL.
All the items needed are available via Aliexpress.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!