Ender 3 chimera vanilla mod

UPDATE!!!

Its done! I semi gave up on the shroud due to printer and chimera size restrictions, but overall everything should work!.

Old Update

This was originally made to just be a mount setup, no holes drilled. That didn't work. So I made an easy way of drilling holes in the plate to fit the chimera along with a spacer for it.

The main thing I have this this mod is one hotend is in the exact same spot as stock, making it ideal for direct drive such as this
https://www.amazon.com/ENOMAKER-Near-Ender-Direct-Extruder/dp/B085ZRPT15/ref=sr_1_4?crid=EGKM3RF1DT7Q&dchild=1&keywords=ender+3+direct+drive&qid=1621244377&sprefix=ender+3+dire%2Caps%2C451&sr=8-4
This mod made an issue of making it impossible to move the location of at least one hotend, so I made this mod exactly for this setup, but it will work on stock ender 3's too!

This thing is now practically done, working on any carriage like the stock one, all thats changing is the fan shroud to be more printer friendly.