Ender 3 Extruder arm lock

Extruder arm lock for easy one-hand loading filament (Ender 3 Pro stock extruder)When changing the filament, it annoyed me to hold the extruder arm with one hand, while trying to hit the filament into the hole with the other.I have therefore created a simple tool which, by means of an eccentric lever, holds the pressed arm of the extruder and at the same time can stay placed on the extruder.Place the tool with the narrower side next to the extruder. First attach the rear end and then thread the front hole onto the extruder arm. It is better to position the lever so that in the down position, its narrower side points towards the hole (by moving up, the arm of the extruder is pressed).The pin can be replaced with an M4 screwPrint SettingsPrinter Brand:CrealityPrinter: Ender 3 ProRafts:NoSupports: NoResolution:0.2Infill: 20%Filament:Creality PLA Black Notes: Print the lock body with the longer side downSupports are not necessary, but it is sufficient to print them only in the middle of th