Ender 3 Face Shield 5 Stack w/ Settings (3DVERKSTAN)

For anyone struggling fine tuning prints or wants to get started fast these files and settings are specific for an Ender 3 with 0.4mm stock nozzle.

The design being used is from Northeast Face Shield Project https://www.nefaceshield.org/

https://cults3d.com/en/3d-model/tool/smoothed-more-comfortable-version-of-protective-visor-by-3dverkstan


These settings will allow you to print 1 mask/hr stacked.


Ender 3 CURA Settings Listed Below

Most Importantly for Stacked Face Shields to Work

- PRINT THIN WALLS (Checked)

- Layer Height: 0.3mm
- Initial Layer Height: 0.25mm
- Line Width: 0.5mm
- Wall Line Width: 0.5mm
- Outer Wall Line Width: 0.5mm
- Inner Wall Line Width: 0.5mm

- Wall Thickness: 1.5mm
- Wall Line Count: 5
- Top/Bottom Thickness: 1.15mm
- Top Layers: 15
- Bottom Layers: 15

- Printing Temperature: 230C
- Build Plate Temperature: 65C

- Print Speed: 80mm/s
- Top/Bottom Speed: 35mm/s

- Enable Retraction: (Checked)
- Maximum Retraction Co