Ender 3 Leveling Wheel/ Knob

****Designed to be used with a post-processing script created with cura (or whatever slicer you are using). Just as affective, you can and a gcode script to pause at the point that covers the hole for the locking nut. In the gcode that is supplied, that would be layer 25 @ 0.24mm layer height. There is no other way the insert the required M4 NYLOC nut as it is enclosed and printed over to hold it it place with no additional adhesive.****

****I have added the following files:****
STL
STEP
CURA GCODE FILE (PROVIDING POST PROCESSING SCRIPT FOR PAUSE TO ADD M4 NYLOC NUT)

Simple almost identical wheel for ender 3 w/ M4 nuts

The fit is very tight originally. I have since calibrated the printer better and may fit better with well tuned printers. If they are too tight, reduce flow rate on your part if using the gcode file or slicer for the STL. Or you can adjust horizontal expansion ( settings dependent on how well your machine is calibrated).

The Gcode is set to 0.24mm layers h