Ender 3 Pi Powerbox

WARNING! If you screw this up you can start a fire or get electrocuted or BOTH! If you don't know what you are doing STOP!

So.... with the warning out of the way here we go.

When done power control of the printer is done through Octoprint (aka python script on pi) using 5v, ground and pin18 (though that is controllable via the script) to turn a relay on/off.

Video: https://youtu.be/On9ZEO7QUV8

Bill of materials
10 - M2x4mm screws
4x - lid
4x - relay mount
2x - plug

2 - M5x20mm screws to attach to 20x20 rail

3 - 14-16 gauge crimp female ends (optional if you want to solder)

1 - M5 Tap kit (watch YouTube videos to learn to use of needed). Cost about $13 USD. Needed to create M5 threaded holes on the 20x20 rail of the Ender 3.

1 - Pi controllable relay -
https://www.amazon.com/gp/product/B082S47JXM/ref=ppx_yo_dt_b_asin_title_o06_s01

1 - C14 Inlet Module Connector Male Power Socket w Switch
https://www.amazon.com/gp/pr