Ender 3 Pro Logitech C270 Mount Arm

Hello,

As I'm currently in the process of upgrading my Ender 3 Pro to Octoprint, I purchased a Logitech C270 Webcam to use with it.

As I wanted a basic, adjustable arm that leaves the V-Slots empty for covers to put in them, and since I didn't find anything I really liked and to practice my Design skills a little more, I decided to make my own design.

I designed this to screw to the front electronics cover with the 2 bolts already there.
The camera needs to be disassembled and mounts to the c270_e3d_camera_arm.stl with the use of the original pin and screw.

Assembly should be quite easy to understand looking at the pictures.
The c270_e3d_arm.stl can be printed as many times as needed, but 2 should be enough like in the picture.

Hardware you will need: (4 times each)
M5 x 20 bolts
M5 nuts

Parts you need to print:

c270_e3d_base_plate.stl (1x)
c270_e3d_base_arm.stl (1x)
c270_e3d_arm.stl (2x)
c270_e3d_camera_arm.stl (1x)
c270_e3