Ender 3 PSU rear mount

A set of brackets to move PSU from the side to the rear of Ender 3. **Does not fit Pro or V2**.

UPDATES:
1. Alternative version **2.0** to be mounted with M5 bolts screwed into tapped holes in openings of profiles. Check if you have those holes tapped already or want to do it. Otherwise use version **1.1**

The distance between PSU case and bottom of ALU profiles is 20.5 mm, so this mod works only together with higher legs that rises printer up to make enough space to fit wide PSU, for example squash feet of my design: https://www.thingiverse.com/thing:4389922. With these there's enough space to keep the PSU silencer too.

Print settings:
* Material: PETG/ABS (PLA may deform over time)
* Layer height: 0.28 - 0.32
* Line width: 0.5
* Wall line count: 1
* Bottom layers: 1
* Top layers: 2
* Infill: 20%

Hardware:
* Bolt M4x8 or M4x10 - x5
* Bolt M4x14 or M4x16 - x4

Instructions:
1. Disconnect PSU, unscrew PSU from Z profile and take off plastic cover
2. Unscrew pow