Ender-3 Raspberry Pi Camera mount
von Soapy
35
Downloads
15
Likes
1
Makes
This is a simple set of components to mount a Raspberry Pi camera with IR LEDS to the Ender-3 frame.
[This is the camera that I used](https://aliexpress.com/item/32421714972.html?spm=a2g0o.productlist.0.0.24ea1ebeuMYxG8&algo_pvid=7fc27bd4-c5cd-41da-89ab-2d10015a382d&algo_expid=7fc27bd4-c5cd-41da-89ab-2d10015a382d-17&btsid=64aef027-9342-43a0-9614-1ce89ad05f9c&ws_ab_test=searchweb0_0,searchweb201602_2,searchweb201603_52)
The Knee joints and arms can be mixed to get the right height and angle for the camera.
The Lids for the camera's might be upgraded because placing the camera now requires a M6 bolt and this is not the best looking method.
The mount is designed in DesignSpark Mechanical (file added) so it can be modified easily
[This is the camera that I used](https://aliexpress.com/item/32421714972.html?spm=a2g0o.productlist.0.0.24ea1ebeuMYxG8&algo_pvid=7fc27bd4-c5cd-41da-89ab-2d10015a382d&algo_expid=7fc27bd4-c5cd-41da-89ab-2d10015a382d-17&btsid=64aef027-9342-43a0-9614-1ce89ad05f9c&ws_ab_test=searchweb0_0,searchweb201602_2,searchweb201603_52)
The Knee joints and arms can be mixed to get the right height and angle for the camera.
The Lids for the camera's might be upgraded because placing the camera now requires a M6 bolt and this is not the best looking method.
The mount is designed in DesignSpark Mechanical (file added) so it can be modified easily
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
