Ender 3 S1 (pro) Cableholder mod

EDIT: Don't use this style cableholder, the way the cable is routed in the stock config can cause levelling errors and other annoyances stemming from the cable getting jammed when the extruder is all the way to the right.
Instead use this https://www.thingiverse.com/thing:5394194
or that https://www.thingiverse.com/thing:5522289
or a combination of both. On s1 Pro that might interfere slightly with the lighting bar, depending on how it the cable is bent. Better check clearances.



--- DON'T USE THIS DESIGN, USE THE ABOVE LINKS! ---

Secures the unprotected cables for the X axis motor and X axis limit switch.


This is a quick-and-dirty mod, but apparently it still fits and does a better job than the original imo. In the image you can see a comparison, the original broke on the initial install attempt and had to be glued. It hasn't been on that long, but the clamp-part has already bent. (probably my fault for using regular PLA though) I'm using a zip-tie and a piece of