Thingiverse
Ender 3 TFT35 V2 Touch screen mount
di irtrail
9
Download
7
Likes
0
Makes
This is a bracket and cover for the BigTreeTech TFT35 V2.
I got a TFT35 V2 as a free add on to the SKR mini E3 V3.
It doesn't have an encoder wheel, so I made a bracket and cover that will accommodate it.
It all prints with no supports and make it as smooth or rough as you please.
It mounts in the stock location.
The cover sandwiches the touchscreen board between it and the bracket. Use some 3mm screws to attach it. They should thread in no problem. I used 8 mm length, but I thing 6 would work. The holes are deep enough you could use longer screws as well.
In all honesty, I haven't set this up yet, and am not sure if the TFT35 without an encoder will work on the Ender 3. Here's hoping!!!
I got a TFT35 V2 as a free add on to the SKR mini E3 V3.
It doesn't have an encoder wheel, so I made a bracket and cover that will accommodate it.
It all prints with no supports and make it as smooth or rough as you please.
It mounts in the stock location.
The cover sandwiches the touchscreen board between it and the bracket. Use some 3mm screws to attach it. They should thread in no problem. I used 8 mm length, but I thing 6 would work. The holes are deep enough you could use longer screws as well.
In all honesty, I haven't set this up yet, and am not sure if the TFT35 without an encoder will work on the Ender 3. Here's hoping!!!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
