Ender-3 V3 Plus Handle

Note: This only fits the E3V3 Plus printer. I have uploaded a handle for the Ender-3 V3 Plus printer.After trying unsuccessfully to update firmware on a coworkers printer I bricked the motherboard. It only showed the blue screen of death. Soooo I bought him a new one for to replace the 3D printer paperweight. He will be getting an upgrade, from the Ender-3 Pro to the Ender-3 V3 Plus printer. After adding the Creality light bar, which it does not come in the box... I realized that if anyone moves this printer, they'll going to be tempted to pick it up by the frame and damage the light bar in the process. I have been searching for a handle but have come up short. So I decided to make my own.The handle has two versions. The first version is just a handle and the second version is the handle plus mounting plate, if you were interested in relocating the filament sensor and spool holder. I designed in Fusion 360 and printed on Bambu Lab X1C. Some of the holes are designed for that printer I was using. I used the X1C in order to print in three filaments. I used manual tree supports and a different color PLA for the inlay of the logo. I'm not sure how Creality printers print supports. My first printer was a Ender-3 S1 Pro but I haven't opened C_u_r_a in a very long time.If you print on the Creality, please let me know if the screw holes are large enough. Also print infill above 15%, what ever you want, just something bigger than 15%. I tested at 15% and I heard stress cracking, nothing to be worried about but small deflection in the handle. I think a higher infill will solve that.You'll need to buyQty 2 - M3x10mm (min/max length 10 or 12mm) andFor the handle only, you will need two metric bolts to install this. If you are handy, you might have these laying around. Else, I found that Ace Hardware sells hardware individually, sorry to those Internationally, I don't know where you can buy this stuff. With this handle only, the filament sensor will stay on the right gantry cont