Ender 5 Drag Chains

This is a complete Cable Chain / Drag Chain for thee Ender 5

You will need :
1 meter 19x10mm Chain - (I bought as sizing is perfect (you can also print)
1 meter 15x10mm Chain - (I bought as sizing is perfect (you can also print)
2 x spring washers 4mm
2 x m3 x 36mm cap screws - for the X Axis Stepper Mount

PLEASE NOTE - I HAD BETTER STEPPER MOTOR CABLES MADE
The lenghts of cables used
Z - 500mm
Extruder - 700mm
Y - 800mm
X - 1000mm

Instructions -

Use the 19x10mm chain to feed all your wiring from the main electronics. Do not add the heatbed power and thermistor wire inside the chain

Use the "90 Deg Link" at the top of your chain, it mounts to the corner bracket, exsisting bolt can be used.

You will have to determine the lenght of the 15x10mm chain to be used on the y axis, I used 18 links (but you can see what will work for you)

Also print this part - https://www.thingiverse.com/thing:4032011

This will go on your hotend side

Mount the "Extruder" p