Ender 5 Max Bed Support Arm

Designed to help support the bed edges as the OEM machine has zero and with the separate mounting of the bed to the frame the expansion with temperature goes un checked the Before/After Photo shows the change after installing only 1, will update with all 4 on the bed and post new bed meshes as it progresses these are designed to use the bed frames holes and attach in a way that you can use a M6x30mm or 36mm Bolt with nuts to lift the corners up and give a better bed mesh PETG or ABS is recommended to help prevent warping at high temps 4-5 walls (Voron quality)20% infill gyroid or similar5 top/bottom layers