Thingiverse

Ender 5 Plus bottom cooling case

by hallamnet

14 Downloads

6 Likes

0 Makes

This is a custom made Creality Ender 5 Plus complete bottom cooling case for ultimate cooling at half the noise.

This uses 2 12v, near silent 60mm fans from RS components (RS Part number: - 696-3544) and 2 12v Noctua 40mm fans (NF-A4X20).

Link to 60mm fan: - https://uk.rs-online.com/web/p/axial-fans/6963544

Link to 40mm fan: - https://www.amazon.co.uk/Noctua-NF-A4x20-PWM-Premium-40x20mm/dp/B07125KWG1/ref=sr_1_3?dchild=1&keywords=noctua+a4&qid=1623197537&sr=8-3

I have installed a small 3 amp LED driver to power a strip of LED's on the case at the top and to power all 4 of the fans.

Link to LED driver: - https://www.amazon.co.uk/YUNLIGHTS-Power-Supply-Driver-Transformer/dp/B017R2F9HW/ref=sr_1_3?dchild=1&keywords=3+amp+led+driver&qid=1623196880&sr=8-3

On testing on a long 14 hour print, I connected a 12v LED to the fan header of the PSU to see if it would power up when the fans are on and it did not proving the design works.

You can actually feel the air being force

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

40 mm (Small)

Est. print time

14 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ender 5 Plus bottom cooling case ?

Any FDM printer should handle Ender 5 Plus bottom cooling case just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 40 mm is recommended.

How long does it take to print Ender 5 Plus bottom cooling case ?

According to the design notes, Ender 5 Plus bottom cooling case takes approximately 14 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Ender 5 Plus bottom cooling case available in?

Ender 5 Plus bottom cooling case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ender 5 Plus bottom cooling case free to download?

Yes, Ender 5 Plus bottom cooling case is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Ender 5 Plus bottom cooling case

Add to Collection