Ender 5 Plus External Electronix Enclosure

I am currently working on turning my Ender 5 Plus into a high temp filament machine. In that endeavour I realized that I would have to move all my electronics outside the main body so that I can use 1/8" acrylic in the frame as an enclosure. So I designed external enclosures for the motherboard, screen, and power supply.

This is designed to work with the SKR 1.4 Turbo, should work with the regular and 1.3 also. Meanwell 500w power supply and TFT35 V3.0, for which I used JimbalNy's TFT35 V3 case https://www.thingiverse.com/thing:4153427.

The entire design revolves around 3mm heat set inserts and 5mm screws for the frame mount.

Here is what you will need as far as hardware is concerned. My count might be a little off.

3mm heatset inserts x 23
3mm x 6 screws x 23
3mm x 12 screws x 4 (for fan)
3mm nuts and washers x 4 (for fan)
5mm x 10 screws x 10
5mm t-nuts or hammer nuts x 10

I have also included the Fusion 360 file if you want to make any modifications to suit your