Thingiverse
Ender 5 PSU spacer bracket
par DeadstrikeGhost
5
Téléchargements
3
Likes
0
Makes
I have created a sort of moved bracket for the psu for the ender 5 to make some space for the btt e3 turbo board that is a little wider than standard boards.
I have also included a bracket for one of those standard dc-dc converters for if you have that in there as well.
You can mount that to the side of the psu.
You will need 4 extra countersunk m4*6 bolts that are used to mount the psu to the control box.
If you don't know how to remove your psu, there are 4 screws hidden under the sticker at the top of the control box on the outside that hold it down.
I have also included a bracket for one of those standard dc-dc converters for if you have that in there as well.
You can mount that to the side of the psu.
You will need 4 extra countersunk m4*6 bolts that are used to mount the psu to the control box.
If you don't know how to remove your psu, there are 4 screws hidden under the sticker at the top of the control box on the outside that hold it down.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
