Thingiverse

Ender 6 Enclosure Top

by Stuart800

176 Downloads

108 Likes

0 Makes

16.02.23 PTFE-Schlauchführung, dann schleift der Schlauch nicht mehr an den Fronttüren.
PTFE hose guide, then the hose no longer grinds on the front doors.

21.05.21 Dichtprofil für Tür, im Vasenmodus gedruckt.
Door sealing profile, printed in vase mode.

28.03.21 Halter für Thermometer hinzugefügt.
Es fehlen noch seitliche untere Dichtleisten und in Vasenmodus gedruckte Dichtprofile für die Türen. Aber der Ender 6 kann ja immer noch keinen Vasenmodus...
Thermometer holder added.
Lateral lower sealing strips and sealing profiles printed in vase mode for the doors are still missing. But the Ender 6 still can't do a vase mode ...
______________________________________________________________________

Danke an Steve32060 für die Ender 6 Ecke.

Diese Ecken sind die Grundlage für die Gehäusehaube. In die Frontscheibe kommt eine Tür, in die Heckscheibe kommt ein 120 mm Ablüfter mit Drehzahlsteller. Es werden Polycarbonatscheiben mit 3 mm Dicke verwendet. Die senkrechten Scheib

case corner corner bracket Creality enclosure Ender Ender 6 housing lid top

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Stuart800 also publishes on

61 additional models across 1 more platforms

Printables

61 models

♥ 2,032 ↓ 9,680 ⚒ 39

Frequently Asked Questions

Which 3D printer is suitable for Ender 6 Enclosure Top ?

Any FDM printer should handle Ender 6 Enclosure Top just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Ender 6 Enclosure Top need supports when printing?

No supports needed for Ender 6 Enclosure Top — it's designed to print clean off the bed.

What file format is Ender 6 Enclosure Top available in?

Ender 6 Enclosure Top is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ender 6 Enclosure Top free to download?

Yes, Ender 6 Enclosure Top is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Ender 6 Enclosure Top

Similar Models

Add to Collection