Ender 6 extruder relocation

Bracket to relocate the extruder to above the z axis - Removes about 200mm of the Bowden tube.

You need to remove the plastic covers at the top of the extrusions and tap threads for m5 bolts to mount the plate.
Extruder can be mounted at multiple angles, you will need to drill where you want it and then use your own bolts, or drill slightly smaller holes than the small bolts already used to mount the extruder and force them in to create a thread - this is not the best way but will get you out of trouble.

The wiring will also need to be extended - i recommend proper solder joints and heat shrink

I also relocated the Spool holder to the back

.2 - .25 layer height
40% Cubic infill