Ender Laser head mount

Long story short, this is a mount that sits on the X-carriage to allow you to mount a laser for engraving.
The laser used was 500mw from a Neje unit, set at 100mm focal distance. In use I raise the z height by 60mm, plus the thickness of the item being burned into.
The laser goes to the laser/fan slot on the board.

I used inkscape with the J-Tech extension to generate the code, adding in a home command, the raise command an a pause prior to actual printing for final moving of the target object. I recommend watching some You-Tube videos on using Inkscape for using the plug-in if you haven't tried it before.

Disclaimer : I made this for my personal educational purposes - if you use it, it is at your own risk. Using lasers can be dangerous, make yourself aware of any safety precautions and follow them!.
***VERY IMPORTANT NOTE*** When using the Laser output on the printer board, it appears to cause the laser to briefly light at full power on startup, when you change cards and wh