Thingiverse
Ender3 fans mount
di cyril1929
68
Download
58
Likes
0
Makes
Fans mount (hotend cover + fan duct) for creality ender 3 stock.
Designed especially for printing ABS.
Only cools the radiator.
No air flow around the nozzle.
Work with stock fans.
Use all stock screws, if you don't put a fan cover.
To put on a fan cover, you will need longer screws.
It's recommended to print the parts near the heat block, in a material that resists heat well (like ABS).
Temperatures next to the heating block can reach 90-100 °C
This thing is made up of 4 parts (each one can have several variants):
-- fans support
-- fan duct
-- fan cover
-- cable fixation
### fans support
4 variants with 0, 1 or 2 cable guide:
-- fansSupport_withCableGuides.STL
-- fansSupport_withCableGuide1only.STL
-- fansSupport_withCableGuide2only.STL
-- fansSupport_withoutCableGuides.STL
**print settings:**
-- Layer Height: 0.2 mm
-- Wall Thickness: 1.2 mm (3 Wall Lines)
-- Top/Bottom Thickness: 1 mm (5 Layers)
-- Supports: Everywhere
### fan duct
Designed especially for printing ABS.
Only cools the radiator.
No air flow around the nozzle.
Work with stock fans.
Use all stock screws, if you don't put a fan cover.
To put on a fan cover, you will need longer screws.
It's recommended to print the parts near the heat block, in a material that resists heat well (like ABS).
Temperatures next to the heating block can reach 90-100 °C
This thing is made up of 4 parts (each one can have several variants):
-- fans support
-- fan duct
-- fan cover
-- cable fixation
### fans support
4 variants with 0, 1 or 2 cable guide:
-- fansSupport_withCableGuides.STL
-- fansSupport_withCableGuide1only.STL
-- fansSupport_withCableGuide2only.STL
-- fansSupport_withoutCableGuides.STL
**print settings:**
-- Layer Height: 0.2 mm
-- Wall Thickness: 1.2 mm (3 Wall Lines)
-- Top/Bottom Thickness: 1 mm (5 Layers)
-- Supports: Everywhere
### fan duct
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
