ENDLESSLY Stackable RC Car Ramp (fits A1 mini)

Endlessly stackable RC car ramp/jump, prints on A1 mini without supports.NOTE! The assembly order is VERY important, as you need to build each complete “width” layer at the same time, or else you won't be able to reach the screws to fix the parts together. Please see below for step by step instructions.All parts are screwed together with the BT3x8 SHCS Self Tapping Screws that are included in the Maker's Beginner Kit or bought separately (link in BOM). Step 1: Lay out the first layer of parts to form your desired height of the ramp/jump. You start with the ramps and the parts marked with “First”.Example for extra height. Step2: The example we will use going forward. Assemble the supports with screws according to their marking, “Bottom”, “Next Height” or “End”. Step3: Lay out the complete next layer, using the parts marked with “Mid”. Step4: Assemble the supports with screws according to their marking, “Bottom”, “Next Height” or “End”, at the same locations as the first layer. S