Energy Blaster ( Simple Version) Easy Print – 3D printable model from Printables

Printables

Energy Blaster ( Simple Version) Easy Print – Bild 1

Energy Blaster ( Simple Version) Easy Print – Bild 2

Energy Blaster ( Simple Version) Easy Print – Bild 3

Energy Blaster ( Simple Version) Easy Print – Bild 4

Energy Blaster ( Simple Version) Easy Print – Bild 5

Energy Blaster ( Simple Version) Easy Print – Bild 6

Props

Energy Blaster ( Simple Version) Easy Print

by k.makesstuff · Props

9 Downloads

4 Likes

0 Makes

Go to Model

This is the Energy Blaster from the book "The Defender" by Larissa Soehn. This Remix is easier to print and assemble.

cosplay prop fanart blaster book apexlegends hansolo easytoprint wingman cosplayprop easyprint easyassembly easytoassemble simpleprint simpledesign alexiaharmon thedefender energyblaster cosplay prop fanart blaster book apexlegends hansolo easytoprint wingman cosplayprop easyprint easyassembly easytoassemble simpleprint simpledesign alexiaharmon thedefender energyblaster

Category

Props

Source

Printables

Published

14.01.2022

Updated

14.01.2022

What you need to print this: Intermediate Medium confidence

Why?

no supports · very large print

Support-free Single piece May need scaling or splitting

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Energy Blaster ( Simple Version) Easy Print?

Any FDM printer should handle Energy Blaster ( Simple Version) Easy Print just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Energy Blaster ( Simple Version) Easy Print need supports when printing?

No supports needed for Energy Blaster ( Simple Version) Easy Print — it's designed to print clean off the bed.

What file format is Energy Blaster ( Simple Version) Easy Print available in?

Energy Blaster ( Simple Version) Easy Print is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.

Is Energy Blaster ( Simple Version) Easy Print free to download?

Yes, Energy Blaster ( Simple Version) Easy Print is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL