EPP EAGLE 1200mm FUSELAGE BOX

Enforced fuselage box for EPP EAGLE 1200 mm.

Since the original wooden structure is too weak, I designed a more durable plug set.

ABS is easy to sand and convenient to glue (use acetone or acetone slurry).
Just in case you forgot or you are new to ABS: remember it shrinks noticeable, so you are adviced to first print a dummy along your bed’s diagonal and see how much shorter your print is, how much your ABS is really shrinking.
With eSUN I needed to increase the complete set by +0,6%
Otherwise the fuselage’s holes will not fit the ones in the EPP flanks.

Printbed dimensons for one piece prints (L + R flanks): 180 x 280 mm

This 'box' is a bit wider than the original, especially at the wings edge.
It's also a bit heavier, but nothing to worry about.

9g servos

Regarding the firewall:
Drill the mounting holes at your convenience.
The front side (motor mount side) has a down-left incidence (front view). Sand this staggered surface before setting together the kit