ePrinter 0.9

The goals of this printer are simple to take as many parts from my Prusa i3 and turn them into a CoreXY printer and if my design failed I could simply rebuild the Prusa print new parts and try again. This means the motors, the linear rods, and electronics are all reused and left in their original state.

The frame will originally be made from 0.5" MDF. Later I will be releasing a frame made with HobbyKing aluminum extrusion.

So what was added new? Well an E3D hot end without a doubt! As well as the linear bearings have been replaced with bushings. The head unit has holes that are universal to fit both direct drive and bowden and possible a laser later.

This printer is not a 100% original or 100% a simple remix. It is a blend or different ideas and different printers.

All the files for the printer can be seen at OnShape and they will be updated from time to time.
https://cad.onshape.com/documents/49a05930080e666fde9d2387/w/c5c347e96b8ab061dbf1a81c/e/e4dc13665934bc55