Thingiverse
ER-11 Collet box
von CFSolutions
9
Downloads
4
Likes
0
Makes
Another storage box.
I designed it for the ER-11 collet serie from 1 to 7 mm including 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 12,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
I designed it for the ER-11 collet serie from 1 to 7 mm including 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 12,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
CFSolutions veröffentlicht auch auf
20 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
