Thingiverse
ER-16 Collet box
door CFSolutions
5
Downloads
4
Likes
0
Makes
Another storage box.
I designed it for the ER-16 collet serie from 1 to 10 mm including an extra 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 21,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
I designed it for the ER-16 collet serie from 1 to 10 mm including an extra 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 21,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
CFSolutions publiceert ook op
20 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
