Erza Scarlet

Project: erza.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x196.72mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Smart Recycled Red Transmission Distance: 4.4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA Smart Recycled Coral Transmission Distance: 2.2 PLA Smart Recycled Yellow Transmission Distance: 9.3 PLA Default White Transmission Distance: 5.1This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #17 (1.44mm) swap to Vermilion Red At layer #21 (1.76mm) swap to Coral At layer #22 (1.84mm) swap to Yellow At layer #26 (2.16mm) swap to White for the rest.