MakerWorld

Characters

escape driver miniature

by Magox · Characters

0 Downloads

0 Likes

0 Makes

Go to Model

Tempo de impressão 3h, altura da camada 0.2, material PLA, suportes com 10%, ângulo de 75°

miniature character driver fuga boneco boda

Category

Characters

Source

MakerWorld

Published

04.12.2025

Updated

02.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does escape driver miniature need supports when printing?

Yes, escape driver miniature will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print escape driver miniature?

According to the design notes, escape driver miniature takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is escape driver miniature available in?

escape driver miniature is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is escape driver miniature free to download?

Yes, escape driver miniature is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

escape driver miniature

Similar Models

Add to Collection