Escher Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 189.43x230mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Kexcelled Fluorescent Yellow Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #15 (1.28mm) swap to Fluorescent Yellow At layer #20 (1.68mm) swap to Jade White for the rest.