ESP 8266 Case for Flipper Zero

I have made this case to protect the ESP 8266 and AMS1117 voltage regulator assembly used as a [Deauther on the Flipper Zero following the instruction of SequoiaSan](https://github.com/SequoiaSan/FlipperZero-Wifi-ESP8266-Deauther-Module). The idea was to protect the pins when the assembly was in my backpack or my pocket.

So it features a protector that you slide and then turn to expose the pin and the USB port of the ESP 8266. Once open you can plug the pins the Flipper Zero or flash the ESP 8266 via the USB port.

BOM
====================
M2*8 mm hex screw flat head and associated nut x6
22 AWG cables
Cyanoacrylate glue

Assembly
====================
1. Print the 4 components (note: the Pivot have to be printed twice). I have soldered the pins included with the Weimos D1 Mini to connect to the Flipper Zero.
2. Solder the electronic components according to the SequoiaSan [instructions](https://github.com/SequoiaSan/FlipperZero-Wifi-ESP8266-Deauther-Module#issues).
3. Pla