Thingiverse

ESP 8266 mounting plate

by HolgiB

9 Downloads

8 Likes

0 Makes

This is a small baseplate for using an ESP8266 together with a single screw
sensor such as for Weatherstations, measuring current / voltage and so on.

The inner diameter of the screwholes is 1.8 mm. Any wood screw around 2 mm in
diameter with a length up to 12 or 15 mm should work fine. I have used Spax 2x12 screws with a PZ1 head. The four mounting post fit an ESP 8266 as well as those base adapters with voltage regulator and pin-outs (see pictures).

I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.

OpenSCAD file is included. So feel free to add mounting posts as needed.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format