Thingiverse
ESP32-CAM Case
von pm3dka
3
Downloads
2
Likes
0
Makes
Just another ESP32-CAM Case.
I used two 2.54mm Single Row Female Socket PC104 1X8 as soldering points for cables but the Long Pins had to be cut down. You can glue the sockets in or even use the case without them.
The holes are intended for some airflow or mounting and can be used to push m3 screws through easily.
To use the CableClip (optional) you need:
**Screws**
- **2x** Self-tapping 2x6mm
To attach the case to the tablestand you need:
**Heat Set Brass Inserts**
- **2x** m3x4mm OD 4.5mm!
**Screws**
- **2x** m3x6mm Hex Socket Cap DIN912
Update 18.08.2025: Added antenna mount for table stand.
I used two 2.54mm Single Row Female Socket PC104 1X8 as soldering points for cables but the Long Pins had to be cut down. You can glue the sockets in or even use the case without them.
The holes are intended for some airflow or mounting and can be used to push m3 screws through easily.
To use the CableClip (optional) you need:
**Screws**
- **2x** Self-tapping 2x6mm
To attach the case to the tablestand you need:
**Heat Set Brass Inserts**
- **2x** m3x4mm OD 4.5mm!
**Screws**
- **2x** m3x6mm Hex Socket Cap DIN912
Update 18.08.2025: Added antenna mount for table stand.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
