MakerWorld

Electronics

Esp32-S3 NES Case - Build your own controller

von Leroyd · Electronics

25 Downloads

42 Likes

10 Makes

Turn an ESP32-S3 Super Mini into a retro Bluetooth controller with an iconic NES look. This compact enclosure lets you easily build: 🎮 A BLE gamepad for PC & Android Android & PC compatible controller – BleGamepad compatible. .ino code included in documentation. 🚗 A custom RC remote 🤖 A robot controller 🛠 Any ESP32-S3 button-based project Features NES-inspired design D-pad + 4 action buttons + Start & Select Integrated LiPo battery compartment Designed for ESP32-S3 Super Mini (with onboard charging) Easy assembly with standard screws The internal layout supports 6x6 mm tactile switches and simple pull-up-to-GND wiring. 🔧 Hardware Required ESP32-S3 Super Mini 10x 6x6 mm tactile switches 1x ON/OFF switch (small slide switch recommended) 3.7V LiPo battery Wires / soldering M2 / M2.5 screws Copper tape (optional, simplifies wiring)

3D 3d printed ble bluetooth controller case DIY electronics enclosure esp32 ESP32-S3 gamepad lipo minimalist nes nes controller RC rc remote retro gaming robot robot controller

Kategorie

Electronics

Quelle

MakerWorld

Veröffentlicht

22.02.2026

Aktualisiert

29.05.2026

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Polycarbonate

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Esp32-S3 NES Case - Build your own controller

Ähnliche Modelle

Zur Sammlung hinzufügen