Espeon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 134.25x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1mmThe Max allowed Thickness is 2.76mm and the Actual Thickness is 2.6mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.92mm) swap to Marine Blue At layer #13 (1.16mm) swap to Magenta At layer #16 (1.4mm) swap to Beige At layer #23 pause for swap the Black for de White color At layer #24 (2.04mm) swap to Jade White for the rest.