ESPixelStick V3 Case

This is a case for the ESPixelStick V3. It’s a cylindrical twist lock design that is meant to be zip tied directly to your elements / props or attached via one of the optional mounts. At a minimum, you will need to print one base and the cover. The ESPixelStick slides snugly into the base as in the pictures. The cover has a slot for optional mounting plates or you can simply use a zip tie through the holes by the mounting slot. 0.2mm interference fits are used in the design so your printer must be dialed in. If your printers over extrudes, the fitment may be so tight that it's not possible to separate the pieces once assembled.BasesBase - Blank.stl - Blank base for user modification. Has no holes for wires. Base - 2x PG7.stl - This is the recommended base to use. It has threads for two PG7 glands which are size appropriately for the typical pigtails and power connections used in holiday lighting displays. Base - 1x PG7.stl - Threaded for a single PG7 gland. Useful for when power is