Thingiverse
Eufy S340 pole mount
door notrslau
8
Downloads
24
Likes
0
Makes
EDIT 2025/11/28. Added STEP files
Simple clamp mount for a Eufy S340 camera onto either a 2" or 100mm pole.
If the mount is exposed to lots of direct sunlight, definitely do not use PLA. Use ASA if your printer supports it, otherwise use PETG.
Two versions, one with inside diameter of 55.6mm (2") and another with 99mm (for a 100mm pipe). Holes are 3mm so #4 wood screw works fine - 2 screws to attach the back to the front, and 3 screws to attach the factory camera bracket to the front. The hole openings in the back part are 7mm so make sure the screw's head size is smaller than that.
Simple clamp mount for a Eufy S340 camera onto either a 2" or 100mm pole.
If the mount is exposed to lots of direct sunlight, definitely do not use PLA. Use ASA if your printer supports it, otherwise use PETG.
Two versions, one with inside diameter of 55.6mm (2") and another with 99mm (for a 100mm pipe). Holes are 3mm so #4 wood screw works fine - 2 screws to attach the back to the front, and 3 screws to attach the factory camera bracket to the front. The hole openings in the back part are 7mm so make sure the screw's head size is smaller than that.
notrslau publiceert ook op
3 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
