Evangelion 5 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 102.51x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Jade White At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to Red At layer #16 (1.36mm) swap to Blue At layer #17 (1.44mm) swap to BambuLab Green At layer #22 (1.84mm) swap to White for the rest.