Evangelion Hueforge - Eva 01

Project: Evangelion Eva 01.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 192x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5.7 PLA Francofil Bleu 5002 Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA R3D Fluo Green Transmission Distance: 3.8 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #10 (0.88mm) swap to Bleu At layer #12 (1.04mm) swap to Jade White At layer #14 (1.2mm) swap to Green At layer #19 (1.6mm) swap to Jade White At layer #20 (1.68mm) swap to Orange At layer #25 (2.08mm) swap to Jade White Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Green for the rest. Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo How