Thingiverse
Everest Gen7 Tail Light Guards
di RedcatRacing
72
Download
51
Likes
0
Makes
Here's another printable scale add-on for your Everest Gen7, and this one is a bit of a printing challenge.
We were successful in printing this on our Taz 6 in the office, with no supports, in PETG. It gets a little stringy, but was fairly easy to clean up.
The ones we printed are un-painted, just glued on to the body over the tail light decal. Enjoy!
#####Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
>In keeping with the non-commercial clause of this license, if you produce this part (both Tail_Light_Guard.stl files) for others, you may not receive compensation in excess of $0.25 per set, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
We were successful in printing this on our Taz 6 in the office, with no supports, in PETG. It gets a little stringy, but was fairly easy to clean up.
The ones we printed are un-painted, just glued on to the body over the tail light decal. Enjoy!
#####Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
>In keeping with the non-commercial clause of this license, if you produce this part (both Tail_Light_Guard.stl files) for others, you may not receive compensation in excess of $0.25 per set, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
